This section should cover everything you need to know about the RoninOS Operating System.
RoninOS Images
PGP Keys Wiki
- Choose an image to download for your device from the download section above. RoninOS is based on Armbian and currently only supports Rockpro64.
- It is recommended that you verify this image using using gpg. If you are unsure about verifying please see our verification page.
- Once you have downloaded the image on your computer, you need to flash it on an SD card. Download and install Balena Etcher. It’s a tool to flash an Operating System image to a micro SD card.
- Start Balena Etcher, make sure your micro SD card is plugged in to your PC, and then select the image file corresponding to RoninOS.
- Finally click on “Flash!” to start the SD card flashing. After a few minutes, the SD card is ready. You can eject it.
- Insert the now flashed SD card into your device, make sure the SSD is plugged, and power on the device.
- You must follow the usual setup steps and create a password using RoninUI.
- After you create a password you can SSH into the device.
Example:
ssh ronindojo@192.168.X.X
¶ Useful Commands
Once the Operating System is setup, you are ready to begin the RoninDojo install process. Below are a few basic commands.
- To install a new package:
apt-get install package-name
apt-get update && apt-get upgrade
Check out the Troubleshooting page for more info.
Need help? Try out our Support Service.
Join the RoninDojo Chatroom and engage the community.