¶ Introduction
This section covers everything you need to know about setting up a RoninDojo bitcoin node on a Rockpro64 computer.
¶ Requirements
¶ Operating System Image for Download
¶ Flash OS Image on SD Card
- Download Balena Etcher.
- Download the RoninOS image from our website.
- It is recommended that you verify this image using using gpg. If you are unsure about verifying please see our verification page.
- Insert micro SD card into your PC, open Balena Etcher, select the RoninOS image, select your microSD card, and finally press
Flash!
¶ Configure
- Insert the now flashed SD card into your device, make sure the SSD is plugged, and power on the device.
- You must follow the usual setup steps and create a password using RoninUI.
- After you create a password you can SSH into the device.
Example:
ssh ronindojo@192.168.X.X
¶ Useful Commands
Once the Operating System is setup, you are ready to begin the RoninDojo install process. Below are a few basic commands.
- To install a new package:
apt-get install package-name
- To update the system:
apt-get update && apt-get upgrade
¶ Additional Info
Check out the Troubleshooting page for more info.
Join the RoninDojo Chatroom and engage the community.